Home   |   How To Use   |   Technical Guide   |    Contact Us   |    Selling Terms & Conditions  
 
Ultra Mount Peel N' Stick | Ultra Core Peel N' Stick
Hard Board Peel N' Stick | 080 Hi Impact Styrene
 
  Laminator                  |                  Accessories                  |                  PhotoPaper  
 
Technical Guide and Instructions for Ultra Mount Peel N' Stick and Ultra Core Peel N' Stick Foam Core Panels
 
    ULTRA PEEL N' STICK is a lightweight, warp resistant, rigid foam centered panel with pressure sensitive adhesive applied to one side. Peel off the protective liner and press down the print for a permanent mount.
Ultra Peel N' Stick is the best choice for mounting photographic papers, posters, drawings, graphs, charts, digital prints, and virtually any type of paper or plastic.
  
 
  1  Make sure there are no particles, water, oil or other residue on the underside of the material. Start at the top of the panel and peel back the protective liner approximately one inch and fold down.  
  2  Position the artwork on the panel making sure to align the corresponding edges of the print with the panel and press into place.  
  3  Slowly peel back the protective liner while pressing the print into place. Make sure to avoid creating air pockets between the print and the panel.  
  4  When the protective liner has been removed, press firmly down over the entire surface. The mounted print is ready to be trimmed and framed.  
  Laminator                  |                  Accessories                  |                  PhotoPaper  
 
Ultra Mount Peel N' Stick | Ultra Core Peel N' Stick
Hard Board Peel N' Stick | 080 Hi Impact Styrene
 
  Home   |   How To Use   |   Technical Guide   |   Contact Us   |   Selling Terms & Conditions  
   

South Asia Plastics©

Telephone: (416) 291-3934 ext 310    Fax: (416) 291-3683    Email: Click here to E-mail